VLF PROOF TESTING SYSTEM
Test engineers and technicians need to proof test cables and switchgear after installation or rework to existing systems. The Adret range of proof testers was designed with simplicity of use and maximum operator safety in mind. The range offers many different models from DC to AC and VLF (very low frequency) as well as combination AC and DC models.
The VLF-40 provides a 40kV AC peak output voltage, suitable for VLF hipot testing 11kV cables and as a voltage source for partial discharge and tan delta testing of 11kV cable. In addition to the standard controls described, this model also contains a Cable Burn mode.
40kV Peak (28kV RMS)/30mA
0.1Hz ≤ 1.1uF Load
0.05Hz ≤ 2.2uF Load
0.02Hz ≤ 5.5uF Load
Stability of frequency: Fluctuation < 0.5% Measurement accuracy: ± 3%. Positive and negative voltage peak errors: ≤ 3%. Voltage waveform distortion: ≤ 5% Dimensions
Control Unit 280×370×220mm. 4kg
Transformer 350×200×360mm. 35kg
Compensating Capacitor (For Short Cables) 300X300X700mm. 10kg
Temperature Indoor and outdoor: -10ºC to + 50ºC.
Humidity: ≤ 85%
230V 50Hz, 6A
Connecting leads in soft carry bag
Telescopic discharge resistor
Units packaged in neat transport cases