CI200
CABLE IDENTIFICATION SYSTEM
Power cable jointing technicians are often faced with the problem of having to cut into existing live cables in order to expand their existing networks. The CI200 was designed to facilitate the positive identification of one disconnected power cable from a bundle. It will, when used correctly positively and safely identify one specific cable. It is very simple to operate and will give perfect results time after time.
PRINCIPLES OF OPERATION
The CI200TX generates a DC Pulse of 50V at about 200A. The signal is transmitted into the cable by directly connecting it to one of the cores on the cable to be identified. The far end of the cable should be connected to earth. The received signal is then picked up by the flexible current clamp and its signal strength displayed through the analog meter on the panel.
The application of the instrument is very simple and very low levels of skills are needed for successful, positive cable identification.
TRANSMITTER
Output Power : 50V @ 200A
Power Supply : 230V Mains or 12V DC (Power Pack)
Weight : 1kg
Battery Indication : Level meter
Battery Life : Approx 8 Hrs
Operating Freq : 1Hz
Range : 20km
Signal : DC Pulsed
Output Protection : Fused
Operating Temp : 0C to +50C
RECEIVER
Power Supply : 1 X 9V PP3 (Alkaline)
Weight : 500g
Battery Indication : Red/Green LED
Battery Life : Approx 8 Hrs
Antenna : Clamp on Rogowski coil
Visual Indication : Analogue Panel Meter
Operating Temp : 0C to +50C
