2510PT
0-25kV DC PROOF TESTING SYSTEM
(Portable Battery Powered)
The 2510PT Pressure Tester can be used for many different applications in the electrical test industry. The unity generates 0-25kV DC at 8mA continous. The unit is battery powered and can be re-charged. When the battery runs down during field testing it can be connected to any standard car battery for use over a longer period. It can also be used from a standard mains supply while the battery is charging. When the power is turned off the unit will discharge any residual energy stored in the test object. Two analog meters display the ouput voltage and leakage current present when testing any installation. The 2510PT can also be used to sectionalize faulty cable networks when failures occur.
The Adret 2510PT 0-25kV Proof Tester generates 0-25kV DC from 12V DC at a constant 8mA charge current. The system will auto discharge the test object when power is turned off.
The unit can be powered from the internal battery, external battery or mains power.
Output Voltage
25kV DC, 8mA Continuous
Safety Features
Automatic cable discharge after test
Power Source
Built In 12V 7.2 AH battery.
12V External battery
230V Mains
Converter Efficiency
85% Efficiency, 110W DC-DC converter
Battery Life
Depends on load conditions.
Dimensions
200X350X300mm, 10kg
Enclosure
Pelican Case, IP67 Rated
Metering
Current 0-10mA Analog
Voltage 0-25kV Analog
Test Environment
Temperature Indoor and outdoor: 10ºC to + 45ºC. Humidity: ≤ 85%
Supply Voltage
230V 50Hz, 15A
Battery Charge Time 4Hrs
12V Car Battery
5m High voltage test lead fixed
1.5m Mains lead
5m Earth lead